Blogging this as the munin docs suck a bit -- lovely and technical but no HOWTOs
anyway I have an out of the box debian munin install on my epia box (hostname mythic) and I wanted to also plot the network traffic on my swisscom VDSL router (which is SNMPable)
Magic incantation to /etc/munin/munin.conf is:
[mythic.localnet]
address 127.0.0.1
use_node_name yes
[router.localnet]
address 127.0.0.1
use_node_name no
(where I have a decent /etc/hosts for localnet) and then do
munin-node-configure-snmp router.localnet | sh
Particulate measurements near bushfires
Back in the 2019 Tasmanian bushfires we were lucky enough to be the other side of the Huon River from the fireground, however we had a LOT...
-
Those of you who follow my twitter stream will have noticed that I managed to 'lose' my home machine today. It was online and activ...
-
There seem to be several branded versions of this cheap 2 unit wide energy meter available online from the regular stores. I have a 'tom... -
Many years ago we lived in the Old Manse in Waternish, Skye. If you look on the maps, you'll spot that unlike nearly all the other house...
No comments:
Post a Comment